Perpustakaan PEM Akamigas

  • Beranda
  • Informasi
  • Berita
  • Bantuan
  • Pustakawan
  • Area Anggota
  • Pilih Bahasa :
    Bahasa Arab Bahasa Bengal Bahasa Brazil Portugis Bahasa Inggris Bahasa Spanyol Bahasa Jerman Bahasa Indonesia Bahasa Jepang Bahasa Melayu Bahasa Persia Bahasa Rusia Bahasa Thailand Bahasa Turki Bahasa Urdu

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title
Penanda Bagikan

Artikel

Development of coated, annular fins for adsorption chillers

Waszkiewicz, S.D., M.J. Tierney,H. Saidani Scott - Nama Orang;

The specific cooling power (SCP) of adsorption chillers could be increased by employing zeolite coated, extended heat transfer surfaces in the generator. An experiment featured 50 annular aluminium fins, 76 mm diameter, each coated with 2 g of zeolite CBV901, and pressed onto a 10 mm bore aluminium tube. A large (4 kg), structurally stiff and easily fabricated casing enclosed the finned tube; the resulting generator assembly formed a ‘‘thermal compressor”, increasing the pressure of methanol vapour from 100 to 280 kPa. During a typical thermal cycle the peak-to-peak temperature changes were: casing temperature 35 K; methanol vapour (inside the generator) 45 K; the fin 65 K; heat transfer liquid 80 K. On a Clapeyron diagram, a non-ideal, anisosteric depressurisation stage was attributed to the relatively high mass of refrigerant vapour in the generator (1 g, compared with at least 8 g held in the zeolite). The radial temperature profile along the fin was modelled by lumping the energy contents of the aluminium and the bonded zeolite into an effective heat capacity. Thereupon, the model was fitted to recorded data – the adjustable coefficients inside the model related to the thermal resistance of the tube-to-finroot interface. The best-fit incurred a root mean square error of 4.0 K, at which point the interfacial resistance governed heat transfer and hence cooling power. Based on computed heat transfer to the fin, the inferred coefficient of performance was 42%; this could be improved by eliminating the interfacial resistance and optimising the fin thickness.


Ketersediaan

Tidak ada salinan data

Informasi Detail
Judul Seri
-
No. Panggil
-
Penerbit
USA : ., 2009
Deskripsi Fisik
-
Bahasa
Indonesia
ISBN/ISSN
-
Klasifikasi
-
Tipe Isi
-
Tipe Media
-
Tipe Pembawa
-
Edisi
29
Subjek
-
Info Detail Spesifik
-
Pernyataan Tanggungjawab
-
Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas
  • 33.artikel.2012.pdf
Komentar

Anda harus masuk sebelum memberikan komentar

Perpustakaan PEM Akamigas
  • Informasi
  • Layanan
  • Pustakawan
  • Area Anggota

Tentang Kami

As a complete Library Management System, SLiMS (Senayan Library Management System) has many features that will help libraries and librarians to do their job easily and quickly. Follow this link to show some features provided by SLiMS.

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS Kontribusi untuk SLiMS?

© 2026 — Senayan Developer Community

Ditenagai oleh SLiMS
Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik
Kemana ingin Anda bagikan?