Ditapis dengan
Pressure Relief Devices (Performance Test Code ASME PTC 25-2018 Revision of A…
Scope: (a) This Code provides instructions in Part II for flow capacity testing and in Part III for in-service and bench testing. Testing of reclosing and nonreclosing pressure relief devices is conducted under various inlet and outlet conditions using steam, gases, and liquids for which valid physical properties are known. (b) The validity of tests shall be determined in accordance to the re…
- Edisi
- -
- ISBN/ISSN
- 978-0-7918-7250-5
- Deskripsi Fisik
- 61 hlm
- Judul Seri
- ASME PTC
- No. Panggil
- (R) 621.6:057.6 Api p.
Air Heaters (ASME PTC 4.3-2017, Revision of ASME PTC 4.3-1968(R1991))
The Code on Definitions and Values (ASME PTC 2) defines the meaning and values of basic technical terms and numerical constants that are used throughout this Code.
- Edisi
- -
- ISBN/ISSN
- 978-0-7918-72028-0
- Deskripsi Fisik
- 245 hlm
- Judul Seri
- ASME PTC
- No. Panggil
- (R) 679.97 Api a.
Power Piping ASME Code for Pressure Piping B31 (ASME B31.1-2018, Revision of …
ASME has been defining piping safety since 1922. ASME B31.1 prescribes minimum requirements for the design, materials, fabrication, erection, test, inspection, operation, and maintenance of piping systems typically found in electric power generating stations, industrial and institutional plants, geothermal heating systems, and central and district heating and cooling systems. It also cove…
- Edisi
- -
- ISBN/ISSN
- 978-0-7918-7213-0
- Deskripsi Fisik
- 355 hlm
- Judul Seri
- ASME
- No. Panggil
- (R) 627.844 Api p.
Pipeline Transportation Systems for Liquids and Slurries (ASME B31.4-2016)
This Code prescribes requirements for the design, materials, construction, assembly, inspection, testing, operation, and maintenance of liquid pipeline systems between production fields or facilities, tank farms, above- or below ground storage facilities, natural gas processing plants, refineries, pump stations, ammonia plants, terminals (marine, rail, and truck), and other delivery and receivi…
- Edisi
- -
- ISBN/ISSN
- 978-0-7918-7024-2
- Deskripsi Fisik
- 22,5 x 28 cm; 120 hlm
- Judul Seri
- An American National Standard
- No. Panggil
- (R) 621.791 Ame p.
Gas Transmission and Distribution Piping Systems (ASME Code for Pressure Pipi…
Gas Transmission And Distribution Piping Systems (a) This Code covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. This Code also covers safety aspects of the operation and maintenance of those facilities. (See Mandatory Appendix Q for scope diagrams.) This Code is concerned only with certain safety aspects of liquefi…
- Edisi
- -
- ISBN/ISSN
- 978-0-7918-7227-7
- Deskripsi Fisik
- 21,5 x 28 cm; 176 hlm
- Judul Seri
- -
- No. Panggil
- (R) 665.62 Ame g.
Proces Piping (ASME Code for Pressure Piping, B31)
ASME B31.1 Power Piping ASME This Power Piping Code is one of several Sections of the American Society of Mechanical Engineers Code for Pressure Piping, B31. This Section is published as a separate document for convenience. Standards and specifications specifically incorporated by reference into this Code are shown in Table 126.1. It is not considered practical to refer to a dated edition of …
- Edisi
- -
- ISBN/ISSN
- 978-0-7918-7226-0
- Deskripsi Fisik
- 21,5 x 27,5 cm; 498 hlm
- Judul Seri
- -
- No. Panggil
- (R) 621.643 Ame p.
Controls and Safety Device for Automatically Fired Boilers
The rules of this Standard cover requirements for the assembly, installation, maintenance, and operation of controls and safety devices on automatically operated boilers directly fired with gas, oil, gas-oil, or electricity, subject to the service limitations, exclusions, and acceptance to other listings in CG-120, CG-130, and CG-140, respectively. A burner field-installed on boilers or as a re…
- Edisi
- -
- ISBN/ISSN
- 978-0-7918-7214-7
- Deskripsi Fisik
- 22 x 28 cm; 56 hlm
- Judul Seri
- ASME CSD - 1
- No. Panggil
- (R) 621.183.3 Ame c.
ASME BPVC. I-2019 (Section I ASME Boiler and Pressure Vessel Code An Internat…
BPVC-I-2019 provides requirements for all methods of construction of power, electric, and miniature boilers; high temperature water boilers used in stationary service; and power boilers used in locomotive, portable, and traction service. Rules pertaining to use of the V, A, M, PP, S and E Code symbol stamps are also included.
- Edisi
- -
- ISBN/ISSN
- 978-0-7918-7265-9
- Deskripsi Fisik
- 359 hlm
- Judul Seri
- ASME BPVC
- No. Panggil
- (R) 621.18.001.3 Ame a-I.
ASME BPVC. VI-2019 (Section VI ASME Boiler and Pressure Vessel Code An Intern…
BPVC-VI-2019 covers general descriptions, terminology and operation guidelines applicable to steel and cast iron boilers limited to the operating ranges of Section IV Heating Boilers. It includes guidelines for associated controls and automatic fuel burning equipment. Illustrations show typical examples of available equipment. Also included is a glossary of terms commonly associated with boiler…
- Edisi
- -
- ISBN/ISSN
- 978-0-7918-7285-7
- Deskripsi Fisik
- 59 hlm
- Judul Seri
- ASME BPVC
- No. Panggil
- (R) 621.8.001.3 Ame a-VI.
ASME BPVC.II.A-2019 Section II Materials (ASME Boiler and Pressure Vessel Cod…
BPVC-IIA-2019 is a service book to the other Code Sections, providing material specifications for ferrous materials adequate for safety in the field of pressure equipment. These specifications contain requirements and mechanical properties, test specimens, and methods of testing. They are designated by SA numbers and are derived from ASTM "A" specifications.
- Edisi
- -
- ISBN/ISSN
- 978-0-7918-7266-6
- Deskripsi Fisik
- 1633 hlm
- Judul Seri
- ASME BPVC
- No. Panggil
- (R) 621.18.001 Ame a-II.A.1
Karya Umum 
Filsafat 
Agama 
Ilmu-ilmu Sosial 
Bahasa 
Ilmu-ilmu Murni 
Ilmu-ilmu Terapan 
Kesenian, Hiburan, dan Olahraga 
Kesusastraan 
Geografi dan Sejarah